User's Manual
3
Introduction
This part provides an overview of the various management tools that can be used to
configure the device. It also provides step-by-step procedures on how to configure the
management settings.
The following management tools can be used to configure the device:
Embedded HTTP/S-based Web server - see 'Web-based Management' on page
Command Line Interface (CLI) - see 'CLI-Based Management' on page
AudioCodes Element Management System - see EMS-Based Management on page
87
Simple Network Management Protocol (SNMP) browser software - see 'SNMP-Based
Management' on page
Configuration ini file - see 'INI File-Based Management' on page
Notes:
•
Some configuration settings can only be done using a specific management tool.
For example, some configuration can only be done using the Configuration ini file
method.
•
Throughout this manual, where a parameter is mentioned, its corresponding Web,
CLI, and ini parameter is mentioned.
•
For a list and description of all the configuration parameters, see 'Configuration
Parameters Reference' on page 503.
•
The ini file parameters are enclosed in square brackets [...].
Version 6.6
81
33
3. Introduction
35
71
89
Mediant 2000