AudioCodes Mediant 2000 User Manual page 289

User's Manual

To configure number manipulation rules:
1. Open the required Number Manipulation page (Configuration tab > VoIP menu > GW
and IP to IP submenu > Manipulations submenu > Dest Number IP->Tel, Dest
Number Tel->IP, Source Number IP->Tel, or Source Number Tel->IP); the relevant
Manipulation table page is displayed.
2. Click the Add button; the following dialog box appears:
Figure 23-2: Number Manipulation Table - Add Dialog Box
3. Click the Rule tab, and then configure the matching characteristics. For a description
of the parameters, see the table below.
4. Click the Action tab, and then configure the manipulation operation. For a description
of the parameters, see the table below.
5. Click Submit to apply your changes.
6. To save the changes to flash memory, see 'Saving Configuration' on page 396.
The table below shows configuration examples of Tel-to-IP source phone number
manipulation rules, where:

Rule 1: When the destination number has the prefix 03 (e.g., 035000), source number
prefix 201 (e.g., 20155), and from source IP Group ID 2, the source number is
changed to, for example, 97120155.

Rule 2: When the source number has prefix 1001 (e.g., 1001876), it is changed to
587623.

Rule 3: When the source number has prefix 123451001 (e.g., 1234510012001), it is
changed to 20018.

Rule 4: When the source number has prefix from 30 to 40 and a digit (e.g., 3122), it is
changed to 2312.

Rule 5: When the destination number has the prefix 6, 7, or 8 (e.g., 85262146),
source number prefix 2001, it is changed to 3146.
Parameter
Source IP Group
Destination
Prefix
Version 6.6
Rule 1 Rule 2
2 0
03
Rule 3
-
*
289
23. Manipulation
Rule 4 Rule 5
- -
* [6,7,8]
Mediant 2000