Viewing The Home Page - AudioCodes Mediant 2000 User Manual

User's Manual
2. Click OK; you are logged off the Web session and the Web Login dialog box appears
enabling you to re-login, if required.
4.2

Viewing the Home Page

The Home page is displayed when you access the device's Web interface. The Home page
provides you with a graphical display of the device's front panel, showing color-coded
status icons for various operations device.

To access the Home page:

On the toolbar, click the Home
Note:
configuration.
In addition to the color-coded status information depicted on the graphical display of the
device, the Home page displays various read-only information in the General Information
pane:

IP Address: IP address of the device

Subnet Mask: Subnet mask address of the device

Default Gateway Address: Default gateway used by the device

Firmware Version: Software version running on the device

Protocol Type: Signaling protocol currently used by the device (i.e. SIP)

Gateway Operational State:
•
"LOCKED": device is locked (i.e. no new calls are accepted)
•
"UNLOCKED": device is not locked
•
"SHUTTING DOWN": device is currently shutting down
To perform these operations, see 'Basic Maintenance' on page 393.
The table below describes the areas of the Home page.
Item #
1 Displays the highest severity of an active alarm raised (if any) by the device:

Green = No alarms

Red = Critical alarm

Orange = Major alarm

Yellow = Minor alarm
To view the active alarms, click this Alarms area to open the Active Alarms page
Version 6.6
The displayed number of modules (trunks) depends on the ordered hardware
Home Page Description
icon.
Description
57
4. Web-Based Management
Mediant 2000