Basic Maintenance; Resetting The Device - AudioCodes Mediant 2000 User Manual

User's Manual
31

Basic Maintenance

The Maintenance Actions page allows you to perform the following:

Reset the device - see 'Resetting the Device' on page

Lock and unlock the device - see 'Locking and Unlocking the Device' on page

Save configuration to the device's flash memory - see 'Saving Configuration' on page
396

To access the Maintenance Actions page, do one of the following:

On the toolbar, click the Device Actions button, and then from the drop-down menu,
choose Reset.

On the Navigation bar, click the Maintenance tab, and then in the Navigation tree,
select the Maintenance menu and choose Maintenance Actions.
31.1

Resetting the Device

The Maintenance Actions page allows you to remotely reset the device. In addition, before
resetting the device, you can choose the following options:

Save the device's current configuration to the device's flash memory (non-volatile).

Perform a graceful shutdown, whereby device reset starts only after a user-defined
time (i.e., timeout) or after no more active traffic exists (the earliest thereof).
Notes:
•
Throughout the Web interface, parameters displayed with a lightning
are not applied on-the-fly and require that you reset the device for them to take
effect.
•
When you modify parameters that require a device reset, once you click the
Submit button in the relevant page, the toolbar displays "Reset" (see 'Toolbar
Description' on page 38) to indicate that a device reset is required.
•
After you reset the device, the Web GUI is displayed in Basic view (see
'Displaying Navigation Tree in Basic and Full View' on page 39).
Version 6.6
Figure 31-1: Maintenance Actions Page
393
31. Basic Maintenance
393
symbol
Mediant 2000
395