AudioCodes Mediant 2000 User Manual page 234


To configure Tel Profiles:
1. Open the Tel Profile Settings page (Configuration tab > VoIP menu > Coders and
Profiles submenu > Tel Profile Settings).
2. From the 'Profile ID' drop-down list, select the Tel Profile index.
3. In the 'Profile Name' field, enter an arbitrary name that enables you to easily identify
the Tel Profile.
4. From the 'Profile Preference' drop-down list, select the priority of the Tel Profile, where
1 is the lowest priority and 20 the highest. If both IP and Tel profiles apply to the same
call, the coders and other common parameters (noted by an asterisk in the description
of the parameter TelProfile) of the preferred Profile are applied to that call. If the
Preference of the Tel and IP Profiles is identical, the Tel Profile parameters are
applied.
Note: If the coder lists of both IP and Tel Profiles apply to the same call, only the
coders common to both are used. The order of the coders is determined by the
preference.
User's Manual
Figure 18-3: Tel Profile Settings Page
234
Mediant 2000
Document #: LTRT-68822