AudioCodes Mediant 2000 User Manual page 146

Parameter
Index
CLI: policy
[IDSPolicy_Index]
Name
CLI: rule
[IDSPolicy_Description]
Description
[IDSPolicy_Name]
3. Add rules to the policy:
a. In the IDS Policy table, select the required policy and then click the IDS Rule
Table link located below the table:
b. Click Add.
c. Configure the parameters as required, and then click Submit. For a description of
these parameters, see the table below. The figure above shows an example
configuration where if 15 malformed SIP messages are received within a period
of 30 seconds, a minor alarm is sent. Every 30 seconds, the rule's counters are
cleared.
d. To add more rules to the policy, repeat steps 1.b to 1.c.
User's Manual
Table 12-1: IDS Policy Table Parameters
Defines the table row number for the policy.
Defines a name for the policy.
The valid value is a string of up to 20 characters.
Defines an arbitrary description of the policy.
The valid value is a string of up to 100 characters.
Figure 12-8: IDS Rule Table of Selected IDS Policy
Figure 12-9: IDS Rule Table - Add Record
Description
146
Mediant 2000
Document #: LTRT-68822