User's Manual
Parameter
Web: Set TEL-to-IP
Redirect Reason
[SetTel2IpRedirectReason
]
Web: Send Screening
Indicator to IP
EMS: Screening Indicator
To IP
[ScreeningInd2IP]
Web: Send Screening
Indicator to ISDN
EMS: Screening Indicator
To ISDN
[ScreeningInd2ISDN]
Web: Copy Destination
Number to Redirect Number
EMS: Copy Dest to Redirect
Number
[CopyDest2RedirectNumb
er]
Version 6.6
Defines the redirect reason for Tel-to-IP calls. If redirect (diversion)
information is received from the Tel, the redirect reason is set to the
value of this parameter before the device sends it on to the IP.
[-1] Not Configured (default)
[0] Unkown
[1] Busy
[2] No Reply
[3] Network Busy
[4] Deflection
[9] DTE out of Order
[10] Forwarding DTE
[13] Transfer
[14] PickUp
[15] Systematic/Unconditional
Overrides the calling party's number (CPN) screening indication in the
received ISDN SETUP message for Tel-to-IP calls.
[-1] Not Configured = (Default) Not configured (interworking from
ISDN to IP) or set to 0 for CAS.
[0] User Provided = CPN set by user, but not screened (verified).
[1] User Passed = CPN set by user, verified and passed.
[2] User Failed = CPN set by user, and verification failed.
[3] Network Provided = CPN set by network.
Note: This parameter is applicable only if the Remote Party ID (RPID)
header is enabled.
Overrides the screening indicator of the calling party's number for IP-to-
Tel ISDN calls.
[-1] Not Configured = (Default) Not configured (interworking from IP
to ISDN).
[0] User Provided = user provided, not screened.
[1] User Passed = user provided, verified and passed.
[2] User Failed = user provided, verified and failed.
[3] Network Provided = network provided
Determines whether the device copies the received ISDN called number
to the outgoing SIP Diversion header for Tel-to-IP calls (even if a
Redirecting Number IE is not received in the ISDN Setup message).
Therefore, the called number is used as a redirect number. Call
redirection information is typically used for Unified Messaging and voice
mail services to identify the recipient of a message.
[0] Don't copy = (Default) Disable.
[1] Copy after phone number manipulation = Copies the called
number after manipulation. The device first performs Tel-to-IP
destination phone number manipulation (i.e., on the SIP To header),
and only then copies the manipulated called number to the SIP
Diversion header for the Tel-to-IP call. Therefore, with this option,
the called and redirect numbers are identical.
[2] Copy before phone number manipulation = Copies the called
number before manipulation. The device first copies the original
called number to the SIP Diversion header, and then performs Tel-
to-IP destination phone number manipulation. Therefore, this allows
you to have different numbers for the called (i.e., SIP To header) and
671
45. Configuration Parameters Reference
Description
Mediant 2000