AudioCodes Mediant 2000 User Manual page 421

User's Manual
7. Click the Next
desired auxiliary files. To return to the previous wizard page, click the Back
button. As you navigate between wizard pages, the relevant file type corresponding to
the Wizard page is highlighted in the left pane.
8. When you have completed loading all the desired files, click the Next
the last wizard page appears ("FINISH" is highlighted in the left pane).
9. Click the Reset
newly loaded files to flash memory and then resets the device.
Note:
even take up to 30 minutes).
After the device resets, the End of Process wizard page appears displaying the new
.cmp and auxiliary files loaded to the device.
Figure 33-5: Software Upgrade Process Completed Successfully
10. Click End Process to close the wizard; the Web Login dialog box appears.
11. Enter your login user name and password, and then click OK; a message box appears
informing you of the new .cmp file.
12. Click OK; the Web interface becomes active, reflecting the upgraded device.
Version 6.6
button to progress to the relevant wizard pages for loading the
button to complete the upgrade process; the device 'burns' the
Device reset may take a few minutes (depending on .cmp file version, this may
421
33. Software Upgrade
button until
Mediant 2000