Searching For Configuration Parameters - AudioCodes Mediant 2000 User Manual

User's Manual
Item #
default is 10.
3 Displays the currently displayed page number.
4.1.7

Searching for Configuration Parameters

You can locate the exact Web page on which a specific parameter appears, by using the
device's Search feature. The Web parameter's corresponding ini file parameter name is
used as the search key. The search key can include the full parameter name (e.g.,
"EnableIPSec") or a substring of it (e.g., "sec"). If you search for a substring, all parameters
containing the specified substring in their names are listed in the search result.
Note:

To search for a parameter:
1. On the Navigation bar, click the Search tab; the Search engine appears in the
Navigation pane.
2. In the field alongside the Search button, enter the parameter name or a substring of
the name for which you want to search. If you have done a previous search for such a
parameter, instead of entering the required string, you can use the 'Search History'
drop-down list to select the string saved from a previous search.
3. Click Search; a list of found parameters based on your search key appears in the
Navigation pane. Each searched result displays the following:
•
ini file parameter name
•
Link (in green) to the Web page on which the parameter appears
•
Brief description of the parameter
•
Menu navigation path to the Web page on which the parameter appears
4. In the searched list, click the required parameter (green link) to open the page on
which the parameter appears; the relevant page opens in the Work pane and the
searched parameter is highlighted in the page for easy identification, as shown in the
figure below:
Version 6.6
If an ini file parameter is not configurable in the Web interface, the search fails.
Figure 4-15: Searched Result Screen
Description
47
4. Web-Based Management
Mediant 2000