10.3.4.2
Material
Precondition
Fig. 30
Further information
84
10
Maintenance
10.3
Engine
2. Position the receptacle.
3. Unscrew and remove the engine sump drain plug
4. Open the shut-off valve
Changing the engine oil filter
Spares
Common tools
Cleaning cloths
Receptacle
The machine is shut down.
The machine is fully vented, the pressure gauge reads 0 bar.
Engine cooled down.
All compressed air consumers are disconnected and the air outlet valves are open.
CAUTION
Danger of burns from hot components and escaping engine oil!
➤ Wear long-sleeved clothing and gloves.
Changing the engine oil filter
Engine oil filter
1
Direction of rotation to unscrew the filter
2
1. Raise the canopy.
2. Prepare a receptacle.
3. Note the direction of rotation
4. Unscrew the filter
. Catch any escaping oil.
1
5. Carefully clean sealing surfaces using lint-free cloth.
6. Lightly oil the new filter's gasket.
7. Turn the oil filter clockwise by hand to tighten.
8. Check the engine oil level.
Top up if the level is too low.
9. Close the canopy.
The engine service manual gives further information on oil filter changing.
Service Manual
Screw Compressor
M43
and drain the oil into the receptacle.
2
3
4
to unscrew the filter.
2
.
5
Engine
Oil dipstick
No.: 9_9432 02 E