Fig. 14 Change From Eye To Ball Coupling (Fixed Height Towbar) - KAESER M43 Service Manual

6.3.3.3
Fig. 14
Precondition
No.: 9_9432 02 E
6 Installation
6.3 Adjusting the chassis
Option sd
Changing a fixed height towbar from eye to ball coupling
Change from eye to ball coupling (fixed height towbar)
Towing eye
1
Screw
2
Sleeve
3
➤ Check that the ball coupling to be fitted is complete.
➤ Proceed as illustrated.
Removing the towing eye
1. Loosen and remove both nuts
2. Remove both bolts
2
3. Pull off the towing eye
4. Secure sleeve .
3
Fitting the ball coupling
The towing eye has been removed.
The assembly condition as shown in the centre graphic in 14 has been achieved.
The complete ball coupling is to hand.
1. Position sleeve on the corresponding hole within the towbar
3
Service Manual Screw Compressor
M43
4
5
6
.
4
.
.
1
Self-locking nut
Ball coupling
Towbar tube
.
6
47