Design And Function Bodywork; Fig. 2 Overview Bodywork - KAESER M43 Service Manual

4 Design and Function
4.1
Fig. 2
24
4 Design and Function
4.1 Bodywork
Bodywork
Bodywork is understood to be the exterior of the machine mounted on the chassis.
Overview Bodywork
Canopy
1
Lower body
2
Cooling air inlet
3
Recessed grip for the canopy
4
Safe and reliable operation is only ensured when the bodywork is closed.
The bodywork has several functions when it is closed:
■ Weather protection
■ Sound insulation
■ Guarding against touching
■ Cooling air flow
The canopy can be opened when the snap fastener
1
leased.
The safety latch is inside the canopy on the right side, next to the handle.
The safety latch can be seen when the snap fastener is released.
When the safety latch is released (pressed in the direction of the arrow) the canopy should open on
its own.
Two spring struts hold the canopy open.
For closing the canopy,
1
Service Manual Screw Compressor
M43
5
6
7
8
a recessed grip is incorporated within the canopy.
4
Snap fastener
Canopy safety catch
Lock
Cover for lifting eye
and the canopy safety latch
5
are re‐
6
No.: 9_9432 02 E