Operation; Starting And Stopping; Starting; Fig. 17 Starting Instruments - KAESER M43 Service Manual

8 Operation

8.1
Precondition
Fig. 17
8.1.1
No.: 9_9432 02 E
8 Operation
8.1

Starting and stopping

Starting and stopping
Pictograms on the instrument panel illustrate the starting and stopping procedures, see also item
in the following illustration.
No personnel are working on the machine.
Starting instruments
Starting and stopping pictogram
1
Instrument panel
2
Compressed air outlet pressure gauge
3
Alternator indicator, group alarm lamp
4
Operating hours counter
5
Temperature gauge switch
6
Bodywork
7
Location of the instrument panel
8

Starting

1. CAUTION!
Serious damage to engine from cold starting sprays.
Cold-start assists, such as ether or other sprays, can cause severe engine damage.
➤ Do not use cold start sprays.
Service Manual Screw Compressor
M43
Location of the «controller ON» switch
9
(within the machine)
Location of the «starter switch» on the ma‐
10
chine
«Controller ON» switch
11
«Starter switch»
12
STOP / OFF
0
ON
I
Preheating
II
Start
III
1
55