Fig. 28 Changing The Engine Oil - KAESER M43 Service Manual

Fig. 28
Further information
82
10 Maintenance
10.3 Engine
CAUTION
Danger of burns from hot components and escaping engine oil!
➤ Wear long-sleeved clothing and gloves.
Changing the engine oil
Oil filler cap
1
Oil filter
2
Oil dipstick
3
Draining the engine oil:
1. Place the oil receptacle below the corresponding drain hole in the floor pan.
2. Unscrew and remove the oil filler cap
3. Undo and remove the oil drain plug
All the old oil must be drained out.
4. Replace the drain plug with a new gasket and tighten.
Dispose of old oil and oil-soaked working materials according to environmental protection
regulations.
See engine service manual for oil change under dusty conditions.
Filling with engine oil
1. Pour in the specified volume of fresh oil into the oil filler.
2. Screw on the filler cap
Checking the engine oil level
It takes a few minutes for oil to reach the sump.
Wait 5 minutes then use the dip stick
The level must be between marks A and B.
Service Manual Screw Compressor
M43
4
5
6
.
1
.
6
.
1
to check the oil level.
3
Engine block
Oil pan
Oil drain plug
No.: 9_9432 02 E