Table of Contents
Advertisement
Tab. 37
3.5
3.5.1
No.: 9_9432 02 E
3
Safety and Responsibility
3.5
Dangers
➤ Oil changing according to BGR 500, chapter 2.11:
The user must ensure that the cooling oil is changed as required or at least annually and the oil
change must be documented. This requirement may be waived if an oil analysis proves that
the oil is still usable.
➤ Recurring inspections according to BGR 500, chapter 2.8:
The user is obliged to ensure that only lifting gear is used that has been expertly inspected and
any deficiencies rectified.
➤ Keep to inspection intervals in accordance with the Ordinance on Industrial Safety and Health
with maximum intervals as laid down in Para. 15.
Inspection
Inspection interval
Internal inspection Every 5 years after commissioning or the
last inspection
Strength test
Every 10 years after commissioning or the
last inspection
Inspection intervals according to Ordinance on Industrial Safety and Health
Dangers
Basic Information
Information concerning the various forms of danger that can arise during machine operation are
found here.
Basic safety instructions are found in this service manual at the beginning of each chapter in the
section entitled 'Safety'.
Warning instructions are found before a potentially dangerous task.
Safely dealing with sources of danger
Information is found here concerning how to counter the various forms of danger that can arise dur‐
ing machine operation.
Exhaust fumes
Exhaust fumes from combustion engines contain carbon monoxide; this gas is odourless and can
cause death.
➤ Never use the machine in enclosed spaces, only in the open.
➤ Do not inhale exhaust fumes.
➤ Direct the exhaust fumes to the open air with a pipe (Ø > than 100 mm).
Fire and explosion
Spontaneous ignition and combustion of fuel can result in serious injury or death.
➤ Allow no open flames or sparks at the place of use.
➤ Do not smoke while refuelling.
➤ Never refuel the machine when it is running.
➤ Do not allow fuel to overflow.
➤ Wipe up spilled fuel immediately.
➤ Keep fuel away from hot machine parts.
Service Manual
Screw Compressor
M43
Inspecting authority
Competent person
(e. g. KAESER Service Technician)
Competent person
(e. g. KAESER Service Technician)
15
Advertisement
Table of Contents
