Adjusting The Towbar Height; Fig. 10 Height Adjustable Towbar Sa - KAESER M43 Service Manual

6.3.1
Fig. 10
No.: 9_9432 02 E
6 Installation
6.3 Adjusting the chassis
Option sa

Adjusting the towbar height

The purpose of height adjustment is to bring the towing eye, or coupling, to the correct height for
the towing vehicle.
At the correct height, the towing eye or coupling should be parallel to the ground.
Height adjustment is by two serrated joints.
■ Serrated joint 1: adjusts the angle of the centre piece to the towbar tube.
─ Maximum adjustment: 50° upwards.
─ Maximum adjustment: 10° downwards.
■ Serrated joint 2: adjusts the angle of the eye or coupling to the centre piece.
Height adjustable towbar sa
Split pin
1,2
Locking lever
3,4
Serrated joint 1
5
Serrated joint 2
6
Towbar tube
7
1. CAUTION!
Danger of pinching!
Severe injury to fingers is possible if they become trapped in the adjusting mechanism.
➤ Always wear protective gloves.
➤ Work with caution.
2. Draw out the split pin
3. Undo the locking lever
4. Make the angle adjustment to the serrated joint
5. Tighten the locking lever
Service Manual Screw Compressor
M43
8
9
10
11
12
.
1
until the serrated joint
3
making sure the serrations engage.
3
Towbar centre-piece
Towing eye
Ball coupling
Split pin securing principle
Safety chains
is disengaged.
5
.
5
39