Engine; Cooler Maintenance; Tab. 58 Regular Maintenance Tasks For Options - KAESER M43 Service Manual

Tab. 58
10.3
10.3.1
Material
Precondition
72
10 Maintenance
10.3

Engine

Option
Function
Option lb - engine air intake shut-off valve
Clean and check the engine air
intake shut-off valve
Fuel filter with water trap, option ne
TL-SM = Tool lubricator service manual; EL = refer to an electrician; SW = refer to a specialized
workshop; KS = call KAESER Service.
Regular maintenance tasks for options
Engine
➤ Carry out maintenance according to the schedule in chapter 10.2.3.1.

Cooler maintenance

Coolant
Coolant tester
Receptacle
Funnel
Cleaning cloths
The machine is shut down.
The machine is standing level.
The machine is fully vented, the pressure gauge reads 0 bar.
Machine cooled down.
All compressed air consumers are disconnected and the air outlet valves are open.
The negative cable to the battery is disconnected.
WARNING
Danger of scalding by hot coolant!
Serious injuries can be caused by hot coolant.
➤ Allow the machine to cool down before opening the enclosure.
CAUTION
There is danger of injury from coolant containing antifreeze!
➤ Avoid eye and skin contact with coolant. If the eyes are affected, rinse immediately with
running water.
➤ Wear protective glasses and gloves.
Service Manual Screw Compressor
M43
X
X
10.7.4
10.3.3.1
No.: 9_9432 02 E