Table of Contents
Advertisement
1-2
Intensity
Lamps can be operated at 6kW, 4kW and 2kW for the AP30CL-6000
Typical Room Requirements
Electrical Connections
The printer operates on 208/240V 60Hz, 3-phase, 3 wires and ground;
480V 60Hz, single-phase, 2 wires and ground; 480V 60Hz, 3-phase, 3
wires and ground; or 380/415V 50Hz, 3-phase, 3 wires and ground and
neutral. We recommend installing a circuit breaker box within easy reach
of the operator.
Connecting power to printer:
•
Run the main power cord through the strain relief and into the tube on
the lower right rear of the printer and up to the power control box on the
left side (see diagram on right).
A
K
TOP VIEW
36"
Rear
36"
Front
Z
Power
Cable
94MS41 Rev. C1 S/W Ver 2.06
36"
TOP VIEW
DETAIL A
DETAIL K
Advertisement
Table of Contents
