!
Cl
1-4
Cooling Requirements
Minimum pressure and flow rate of the chilled water depends on input
temperature. For proper cooling system selection, contact OLEC.
If water temperature and water flow do not meet the following
specifications the unit will overheat, one or both lights sources
will shut themselves off randomly under heavy usage and
damage to the unit will be the result.
•
AP30CL-6000
Cooling Requirements:
Water Pressure:
24,000 BTU / hr at idle
22 PSI (18 GPM)
minimum at 50°F (10°C)
94MS41 Rev. C1 S/W Ver 2.06
65,000 BTU / hr at full load
8 PSI (9 GPM) minimum at
45°F (7°C)