[ E HI_]
[ E Lo_]
[ E Cr_]
0
1
2
3
4
5
6
7
8
9
[ 1 825]
4-10
Press the 2 key. The letters [ E Hi_] will appear in the Vacuum window.
The Exposure window will display the number of exposures made at
high power.
Press the 2 key a second time. The letters [ E Lo_] will appear in the
Vacuum window. The Exposure window will display the number of
exposures at low power.
Press the 2 key a third time. The letters [ E Cr_] will appear in the Vacuum
window. The number of exposures at medium power will be displayed
in the Exposure window.
Press the 0 key twice to exit this mode.
•
Selecting a Memory Location
Press and release the Y key on the operator control panel to cycle through
•
the 40 memory locations (0-39).
•
You may go to a particular memory by entering the desired memory
number on the numerical keypad on the integrator.
EXAMPLE: Enter a desired memory number, e.g. 12. Press the
corresponding keys, 1 then 2 on the numerical keypad, then press the
Y key.
Quick Keypad
Instant access by pressing any of the memory locations from 0 to 9.
Entering an Exposure Time
Press the e key on the integrator.
Note: The Memory and Vacuum windows will dim.
Enter desired exposure time by depressing corresponding number on key
pad. For example 1,8,2,5
Press the e key to confirm the entry.
•
94MS41 Rev. C1 S/W Ver 2.06