Table of Contents
Advertisement
10-8
Frame Glass Replacement
Note: Wear leather gloves and safety glasses when performing this
procedure.
•
Open the frame to be changed.
•
Remove the two glass retaining screws on the front edge of the glass
frame.
•
Push up on the glass from under the frame. Hold it up about 12 inches
(305 mm) off of the frame.
•
Disconnect both vacuum hoses and lift out the glass.
•
Install new glass in the reverse order.
Gas Strut Replacement
Each frame assembly has two gas struts to support the top coversheet
frame when it is opened.
•
Open the frame with the strut to be replaced.
•
Remove the retainer from both ends of the strut.
•
Pull the strut from the retaining ball mounts.
•
Install the new strut in the reverse order.
94MS41 Rev. C1 S/W Ver 2.06
Advertisement
Table of Contents
