Range Mode - Omron CJ1W-CT021 Operation Manual

Output Control
3-5-1

Range Mode

Example Range Mode with Linear Counter
If the Unit is configured to control the Outputs in Range Mode, this Mode can be
applied to Circular Counters or Linear Counters (refer to 3-2-2 "Circular Counter"
and 3-2-3 "Linear Counter" for more information).
Minimum Count Limit
−2,147,483,648
(=80000000 )
H
Range 0
External
Output 0
External Output 1
Internal Output 2
Internal Output 3
Range Lower Range Limit
0
1
2
3
In this example four Ranges are specified. The configuration data of the Counter
shows that:
•
Output 0 must be ON for Counter Values within Range 0.
•
Output 1 and 3 must be ON for Counter Values within Range 1.
•
Output 2 must be ON for Counter Values within Range 2.
•
Both of the Outputs 0 and 3 must be ON for Counter Values within Range 3.
In the above example the Counter Value is within Range 1 and 3 and consequently
the Outputs 0, 1 and 3 are turned ON.
Counter Value
0
Counter Value
Range 1
Range 2
Upper Range Limit
−20,000 −10,000
−1,000
+19,000
−5,000
11,000
+25,000
6,000
Section 3-5
Maximum Count Limit
+2,147,483,647
Current
(=7FFFFFFF
Range 3
Output ON
0
1, 3
2
0, 3
)
H
67