Revision History - Omron CJ1W-CT021 Operation Manual

A manual revision code appears as a suffix to the catalog number on the front cover of the manual.
The following table outlines the changes made to the manual during each revision. Page numbers refer to the
previous version.
Revision code Date
01 October 2001
02 August 2003
03 April 2008
04 April 2011

Revision History

Cat. No. W401-E1-04
Revised content
Original production
Minor revisions made throughout the manual, such as changing "PC" to "PLC," and
the following other changes were also made:
Page 4: Information on run-time added.
Pages 5 and 7: Note changed.
Page 10: Note changed, and new note added.
Page 11: Note added.
Page 13: Removed "E6B2-type" from first sentence.
Pages 53, 54, 61, and 62: Note added.
Page 64: Information on digital input status added.
Page 67: "Output" changed to "External output" and "Soft Output" changed to
"Internal output" in diagram.
Page 70: Information on specifying range-data added, including note on precautions.
Pages 71, 75, 83, 93, and 99: Note added.
Page 101: Two notes added.
Page 106: Note added.
Page 108: Two notes added.
Pages 114 and 116: Information added to note.
Page 125: Note on interrupts changed.
Page 132: Information on remedy for system error changed.
Page 137: Information on Interrupt FIFO full error added.
Page 138: Information on clearing Interrupt FIFO full errors changed.
Page 163: "0-3" changed to "0-1" for digital outputs and digital inputs in table, and
terminal arrangement in diagram changed.
Page 167: Note added at end of page.
Page 168: Added two new appendices (Appendix D and Appendix E) including
information on operating restrictions and execution times for IORF, IOWR, and IORD
instructions.
Page vi: Added warranty and liability information.
Pages 43, 177, and 181: Changed "RS422" to "RS-422."
Page xiv: Several precautions added.
Page 7: Specification names for temperature modified and storage temperature range
changed.
Page 8: "Rate Range" added to the last row.
Page 12: Timing requirements for 500 kHz in the bottom table changed.
Revision code
183