Omron CJ1W-CT021 Operation Manual page 127

Memory Allocation
Word
m+17 00-07
08-15
m+18 00-07
08-15
m+19, m+20 00-15
m+21, m+22 00-15
m+23 to m+29 00-15
Bit Item
Digital Input 0
Function
Counter Number
Digital Input 1
Function
Counter Number
Reserved.
Predefined Output
Pattern
---
Function Digital Input 0 (all in BCD):
00 = No function
01 = Gate Positive
02 = Gate Negative
03 = Preset Rising Edge
04 = Preset Falling Edge
05 = Reset Rising Edge
06 = Reset Falling Edge
07 = Capture Rising Edge
08 = Capture Falling Edge
09 = Stop, Capture and Continue
10 = Stop, Capture and Continue (inverted)
11 = Stop, Capture, Reset and Continue
12 = Stop, Capture, Reset and Continue (inverted)
13 = Capture-Reset Rising Edge
14 = Capture-Reset Falling Edge
15 = Enable Reset
16 = Disable Reset
(refer to 3-4 "Digital Input Functions" for details)
Counter Number (1-4) to which Digital Input 0 is
connected
Function Digital Input 1:
(for a list refer to Digital Input 0)
(refer to 3-4 "Digital Input Functions" for details)
Counter Number (1-4) to which Digital Input 1 is
connected
Cannot be used. (Set to 0000.)
Predefined Output Pattern that is applied to the Outputs if
configured in m+6, Predefine Output States
Not used
Section 4-2
Function
107