Group Call Pickup - Yealink SIP-T2 SERIES Administrator's Manual

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Press
3.
Press
4.
Press
5.
field.
(Optional.) Enter the string that will appear on the LCD screen in the Label field.
6.
Enter the directed call pickup code followed by the specific extension in the Value field.
7.
Press the Save soft key to accept the change.
8.

Group Call Pickup

Group call pickup is used for picking up incoming calls within a pre-defined group. If the group
receives many incoming calls at once, the user will pick up the first incoming call, using a group
pickup key or the GPickup soft key. This feature depends on support from a SIP server. For
many SIP servers, group call pickup requires a group pickup code, which can be configured on a
phone or a per-line basis.
Procedure
Group call pickup can be configured using the configuration files or locally.
Configuration File
408
or , or the Switch soft key to select Key Event from the Type field.
or , or the Switch soft key to select DPickup from the Key Type field.
or , or the Switch soft key to select the desired line from the Account ID
<MAC>.cfg
<y0000000000xx>.cfg
Configure the group call pickup code for
SIP account.
Parameter:
account.X.group_pickup_code
Configure group call pickup features on a
phone basis.
Parameters:
features.pickup.group_pickup_enable
features.pickup.group_pickup_code
Assign a group call pickup key.
Parameters:
linekey.X.type/ programablekey.X.type/
expansion_module.X.key.Y.type
linekey.X.line/ programablekey.X.line/
expansion_module.X.key.Y.line
linekey.X.value/ programablekey.X.value/
expansion_module.X.key.Y.value
linekey.X.label/ programablekey.X.label/
expansion_module.X.key.Y.label