Yealink SIP-T2 SERIES Administrator's Manual page 214

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Mark the DST by Week radio box in the Fixed Type field.
-
Select the desired values of DST Start Month, DST Start Week of Month, DST Start Day
of Week, Start Hour of Day; DST Stop Month, DST Stop Week of Month, DST Stop Day
of Week and End Hour of Day from the pull-down lists.
Enter the desired offset time in the Offset(minutes) field.
7.
Click Confirm to accept the change.
8.
Customizing an AutoDST Template File
The time zone and corresponding DST pre-configurations exist in the AutoDST file. If the DST is
set to Automatic, the IP phone obtains the DST configuration from the AutoDST file. You can
customize the AutoDST file if required. The AutoDST file allows you to add or modify time zone
and DST settings for your area each year.
Before customizing, you need to obtain the AutoDST file. You can ask the distributor or Yealink
FAE for DST template. You can also obtain the DST template online:
http://support.yealink.com/documentFront/forwardToDocumentFrontDisplayPage
information on obtaining the template file, refer to
on page
Files 54
The following table lists description of each element in the template file:
Element
DSTData
DST
szTime
szZone
190
.
Type
required no
required no
required [+/-][X]:[Y], X=0~14, Y=0~59
String (if the content is more
required
than one city, it is the best to
Obtaining Configuration Files and Resource
Values
File root element
Time Zone item's root
element
Time Zone
Time Zone name
. For more
Description