Distinctive Ring Tones - Yealink SIP-T2 SERIES Administrator's Manual

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
To change the ring tone for the account via web user interface:
Click on Account->Basic.
1.
Select the desire account from the pull-down list of Account.
2.
Select the desired ring tone from the pull-down list of Ring Type.
3.
Click Confirm to accept the change.
4.
To select a ring tone for the phone via phone user interface:
Press Menu->Settings->Basic Settings->Sound->Ring Tones->Common.
1.
Press
2.
Press the Save soft key to accept the change or the Back soft key to cancel.
3.
To select a ring tone for the account via phone user interface:
Press Menu->Settings->Basic Settings->Sound->Ring Tones.
1.
Press
2.
Press
3.
If Common is selected, this account will use the ring tone selected for the phone.
Press the Save soft key to accept the change or the Back soft key to cancel.
4.

Distinctive Ring Tones

Distinctive ring tones allows certain incoming calls to trigger IP phones to play distinctive ring
tones. The IP phone inspects the INVITE request for an "Alert-Info" header when receiving an
incoming call. If the INVITE request contains an "Alert-Info" header, the IP phone strips out the
URL or keyword parameter and maps it to the appropriate ring tone.
Note If the caller already exists in the local directory, the ring tone assigned to the caller should be
preferentially played.
818
or to select the desired ring tone.
or to select the desired account and then press the Enter soft key.
or to select the desired ring tone.