Calling Line Identification Presentation - Yealink SIP-T2 SERIES Administrator's Manual

Select the desired line from the pull-down list of Line.
5.
Click Confirm to accept the change.
6.
To configure a call park key via phone user interface:
Press Menu->Features->DSS Keys.
1.
Select the desired DSS key.
2.
Press
3.
Press
4.
Press
5.
field.
(Optional.) Enter the string that will appear on the LCD screen in the Label field.
6.
Enter the call park code in the Value field.
7.
Press the Save soft key to accept the change.
8.
To configure a retrieve park key via phone user interface:
Press Menu->Features->DSS Keys.
1.
Select the desired DSS key.
2.
Press or
3.
Press or
4.
ID field.
(Optional.) Enter the string that will appear on the LCD screen in the Label field.
5.
Enter the retrieve park code in the Value field.
6.
Press the Save soft key to accept the change.
7.

Calling Line Identification Presentation

Calling Line Identification Presentation (CLIP) allows IP phones to display the caller identity,
derived from a SIP header contained in the INVITE message when receiving an incoming call. IP
phones support deriving caller identity from three types of SIP header: From,
P-Asserted-Identity (PAI) and Remote-Party-ID (RPID). Identity presentation is based on the
identity in the relevant SIP header.
If the caller already exists in the local directory, the local contact name assigned to the caller
Note
should be preferentially displayed and stored in the call log.
or , or the Switch soft key to select Key Event from the Type field.
or , or the Switch soft key to select Call Park from the Key Type field.
or , or the Switch soft key to select the desired line from the Account ID
, or the Switch soft key to select Retrieve Park from the Type field.
, or the Switch soft key to select the desired account from the Account
Configuring Basic Features
443