Sending Volume - Yealink SIP-T2 SERIES Administrator's Manual

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Parameter
1-Enabled
If it is set to 1 (Enabled), users can use two headsets on one phone. When the IP phone
joins in a call, the users with the headset connected to the headset jack have a full-duplex
conversation, while the users with the headset connected to the handset jack are only
allowed to listen to.
Note: It is not applicable to CP860 IP phones.
Web User Interface:
Features->General Information->Dual-Headset
Phone User Interface:
None
To configure dual headset via web user interface:
Click on Features->General Information.
1.
Select the desired value from the pull-down list of Dual-Headset.
2.
Click Confirm to accept the change.
3.

Sending Volume

Sending volume allows user to adjust the sending volume of currently engaged audio devices
(handset, speakerphone or headset) when the phone is in use.
Note
It is not applicable to CP860 IP phones.
838
Permitted Values Default