Yealink SIP-T2 SERIES Administrator's Manual page 303

Scenario C - Using the Custom Avatar and Custom Icon for Contact
This scenario is only applicable to SIP VP-T49G and SIP-T48G IP phones.
Scenario Conditions I (only applicable to SIP VP-T49G IP phones):
Provisioning server URL: tftp://192.168.10.25.

The custom avatars and icons: "cutom1.jpg" and "cutom2.png". They are all uploaded to

the provisioning server in advance.
Scenario Conditions II:
Provisioning server URL: tftp://192.168.10.25.

The custom avatars: "cutom1.jpg" and "cutom2.png". They are compressed as a tar

formatted file (photo1.tar).
The custom icons: "cutom1.jpg" and "cutom2.png". They are compressed as a tar

formatted file (photo2.tar).
For more information on generating a tar formatted file, refer to
File on page 275.
Note The custom avatar and icon can be different, but make sure the icon name is the same as avatar
name.
To customize a local contact file:
Open the template file using an ASCII editor.
1.
For each group that you want to add, add the following string to the file. Each starts on a
2.
separate line:
<group display_name="" ring=""/>
For each contact that you want to add, add the following string to the file. Each starts on a
3.
separate line:
<contact display_name="" office_number="" mobile_number="" other_number="" line=""
ring="" group_id_name="" default_photo=""/>
Specify the values within double quotes.
4.
For example:
<group display_name="Friend" ring="Resource:Splash.wav"/>
<contact display_name="Lily" office_number="1020" mobile_number="1021"
other_number="1112" line="1,2" ring="Resource:Ring1.wav" group_id_name="Friend"
default_photo="Config:cutom1.jpg"/>
Configuring Basic Features
Preparing the Tar Formatted
279