Call Transfer - Yealink SIP-T2 SERIES Administrator's Manual

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
If you select No Answer Forward, you can configure it for a specific account.
c)
1)
2)
3)
4)
You can also configure the no answer forward for all accounts. After the no answer
forward was configured for a specific account, do the following:
1)
2)
3)
Press the Save soft key to accept the change.
5.
To configure forward international via phone user interface:
Press Menu->Settings->Advanced Settings (default password: admin) ->FWD
1.
International.
Press
2.
International field.
Press the Save soft key to accept the change.
3.

Call Transfer

Call transfer enables IP phones to transfer an existing call to another party. IP phones support
call transfer using the REFER method specified in RFC 3515 and offer three types of transfer:
Blind Transfer -- Transfer a call directly to another party without consulting. Blind transfer

is implemented by a simple REFER method without Replaces in the Refer-To header.
Semi-attended Transfer -- Transfer a call after hearing the ringback tone. Semi-attended

transfer is implemented by a REFER method with Replaces in the Refer-To header.
Attended Transfer -- Transfer a call with prior consulting. Attended transfer is

implemented by a REFER method with Replaces in the Refer-To header.
Normally, call transfer is completed by pressing the transfer key. Blind transfer on hook and
attended transfer on hook features allow the IP phone to complete the transfer through
on-hook.
When a user performs a semi-attended transfer, semi-attended transfer feature determines
whether to display the prompt "n New Missed Call(s)" ("n" indicates the number of the missed
382
Press or , or the Switch soft key to select the desired value from the
No Answer Forward field.
Enter the destination number you want to forward all unanswered incoming
calls to in the Forward to field.
Press or , or the Switch soft key to select the ring time to wait before
forwarding from the After Ring Time field.
The default ring time is 12 seconds.
(Optional.) Enter the no answer forward on code and off code respectively in the
On Code and Off Code field.
Press or to highlight the No Answer Forward field.
Press the All Lines soft key.
The LCD screen prompts "Copy to all lines?".
Press the OK soft key to accept the change.
or , or the Switch soft key to select the desired value from the FWD