Yealink SIP-T2 SERIES Administrator's Manual page 879

Parameters
Example:
account.1.ptime = 20
Web User Interface:
Account->Advanced->PTime(ms)
Phone User Interface:
None
phone_setting.audio_codec_byte_order.enable
Description:
Enables or disables the special audio codec byte sequence.
Note: Different devices have different definition about how some Codecs are stored
(Big-endian or little-endian), which may lead to the audio incompatibility problems
between Yealink and certain devices. You can enable the special audio codec byte
sequence feature to solve these incompatibility problems. It is only applicable to SIP
VP-T49G IP phones.
Web User Interface:
None
Phone User Interface:
None
To configure the codecs to use and adjust the priority of the enabled codecs for SIP
account via web user interface:
Click on Account->Codec.
1.
Select the desired account from the pull-down list of Account.
2.
Select the desired codec from the Disable Codecs column and then click
3.
The selected codec appears in the Enable Codecs column.
Repeat the step 4 to add more codecs to the Enable Codecs column.
4.
To remove the codec from the Enable Codecs column, select the desired codec and then
5.
click .
Configuring Audio Features
Permitted
Default
Values
0 or 1 0
.
855