Call Forward - Yealink SIP-T2 SERIES Administrator's Manual

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Enter the SIP URI (e.g., sip:moh@sip.com) in the Music Server URI field.
3.
Click Confirm to accept the change.
4.

Call Forward

Call forward allows users to redirect an incoming call to a third party. IP phones redirect an
incoming INVITE message by responding with a 302 Moved Temporarily message, which
contains a Contact header with a new URI that should be tried. Three types of call forward:
Always Forward -- Forward the incoming call immediately.

Busy Forward -- Forward the incoming call when the IP phone or the specified account is

busy.
No Answer Forward -- Forward the incoming call after a period of ring time.

Call forward can be configured on a phone or a per-line basis depending on the call forward
mode. The following describes the call forward modes:
Phone (default): Call forward feature is effective for the IP phone.

Custom: Call forward feature can be configured for each or all accounts.

The server-side call forward settings disable the local call forward settings. If the server-side call
forward feature is enabled on any of the IP phone's registrations, the other registrations are not
affected. DND activated on the IP phone disables the local no answer forward settings.
The call forward on code and call forward off code configured on IP phones are used to
activate/deactivate the server-side call forward feature. They may vary on different servers.
360