Directed Call Pickup - Yealink SIP-T2 SERIES Administrator's Manual

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
None
To configure allow trans exist call via web user interface:
Click on Feature->General Information.
1.
Select the desired value from the pull-down list of Allow Trans Exist Call.
2.
Click Confirm to accept the change.
3.

Directed Call Pickup

Directed call pickup is used for picking up an incoming call on a specific extension. A user can
pick up the incoming call using a directed pickup key or the DPickup soft key. This feature
depends on support from a SIP server. For many SIP servers, directed call pickup requires a
directed pickup code, which can be configured on a phone or a per-line basis.
It is recommended not to configure the directed call pickup key and the DPickup soft key
Note
simultaneously. If you do, the directed call pickup key will not be used correctly.
Procedure
Directed call pickup can be configured using the configuration files or locally.
Configuration File
396
Parameter
<MAC>.cfg
Permitted Values
Configure the directed call pickup
code for SIP account.
Parameter:
account.X.direct_pickup_code
Default