Scenario A Keep User Personalized Configuration Settings - Yealink SIP-T2 SERIES Administrator's Manual

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
during auto provisioning.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will periodically upload the <MAC>-local.cfg file to the
provisioning server to back up this file. During auto provisioning, the IP phone will download the
<MAC>-local.cfg file from the provisioning server to override the one stored on the phone.
If it is set to 0 (Disabled), the IP phone will not upload the <MAC>-local.cfg file to the
provisioning server. During auto provisioning, the IP phone will not download the
<MAC>-local.cfg file from the provisioning server.
Web User Interface:
None
Phone User Interface:
None
auto_provision.custom.upload_method
Description:
Configures the way the IP phone uploads the <MAC>-local.cfg file to the provisioning server (for
HTTP/HTTPS server only).
0-PUT
1-POST
Note: It works only if the value of the parameter "auto_provision.custom.sync" is set to 1
(Enabled).
Web User Interface:
None
Phone User Interface:
None
For more information on how to configure these parameters in different scenarios, refer to the
following introduced scenarios.

Scenario A Keep user personalized configuration settings

Scenario (A) Keep user personalized configuration settings (IP phones
are running firmware version prior to X.73.0.1)
The administrator wishes to upgrade firmware from the old version to the latest version.
Meanwhile, keep user personalized settings after auto provisioning and upgrade. This
scenario is only applicable to SIP-T48G/T46G/T42G/T41P IP phones.
58
Parameters Permitted Values Default
0 or 1 0