Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Details of Configuration Parameters:
phone_setting.custom_softkey_enable
Description:
Enables or disables custom soft keys layout feature.
0-Disabled
1-Enabled
Web User Interface:
Settings->Softkey Layout->Custom Softkey
Phone User Interface:
None
To configure softkey layout via web user interface:
Click on Settings->Softkey Layout.
1.
Select the desired value from the pull-down list of Custom Softkey.
2.
Select the desired state from the pull-down list of Call States.
3.
Select the desired soft key from the Unselected Softkeys column and then click
4.
The selected soft key appears in the Selected Softkeys column. If more than four soft keys
are selected, a More soft key will appear on the LCD screen, and the selected soft keys are
displayed in two pages.
Repeat the step 4 to add more soft keys to the Selected Softkeys column.
5.
To remove the soft key from the Selected Softkeys column, select the desired soft key and
6.
then click
To adjust the display order of soft keys, select the desired soft key and then click
7.
or
.
222
Parameters
.
=settings-softkey&q=load
For SIP VP-T49G:
http://<phoneIPAddress>/servlet?m
=mod_data&p=settings-softkey&q
=load
Permitted Values
0 or 1
Default
0
.