Blf Led Mode - Yealink SIP-T2 SERIES Administrator's Manual

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
for the DPickup soft key, refer to

BLF LED Mode

BLF LED Mode provides five kinds of definition for the BLF/BLF List key LED status. As there is no
hard line key on SIP VP-T49G and SIP-T48G IP phones, BLF LED mode configuration is only
applicable to SIP-T46G/T42G/T41P/T40P/T29G/T27P/T23P/T23G/T21(P) E2 IP phones. BLF LED
mode is also applicable to the expansion module EXP40 connected to SIP-T48G/T46G IP phones,
EXP20 connected to SIP-T29G and SIP-T27P IP phones. The following table lists the LED statuses
of the BLF key when BLF LED Mode is set to 0, 1, 2, 3 or 4 respectively. The default value of BLF
LED mode is 0.
BLF LED mode feature is also applicable to BLF list key. For more information on BLF List key,
refer to BLF List
Line key/Expansion Module Key LED (configured as a BLF key or a BLF List key and BLF LED
Mode is set to 0)
LED Status
Solid green
Fast flashing red (200ms)
Solid red
Slow flashing red (1s)
Off
Line Key/Expansion Module Key LED (configured as a BLF key or a BLF List key and BLF LED
Mode is set to 1)
LED Status
Fast flashing red (200ms)
Solid red
Slow flashing red (1s)
Off
530
Directed Call Pickup
on page 540.
The monitored user is idle.
The monitored user receives an incoming call.
The monitored user is dialing.
The monitored user is talking.
The monitored user's conversation is placed on hold (This
LED status requires server support).
The call is parked against the monitored user's phone
number.
The monitored user does not exist.
The monitored user receives an incoming call.
The monitored user is dialing.
The monitored user is talking.
The monitored user's conversation is placed on hold (This
LED status requires server support).
The call is parked against the monitored user's phone
number.
The monitored user is idle.
The monitored user does not exist.
on page 395.
Description
Description