Scenario A - Capturing The Current Screen Of The Phone - Yealink SIP-T2 SERIES Administrator's Manual

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Multiple IP addresses are separated by commas. If you enter "any" in this field, the IP phone
can receive and handle GET requests from any IP address. If you leave the field blank, the IP
phone cannot receive or handle any HTTP GET request.
Click Confirm to accept the change.
3.

Scenario A - Capturing the Current Screen of the Phone

You can capture the screen display of the IP phone using the action URI. IP phones support
handling an HTTP or HTTPS GET request. The URI format is
http(s)://<phoneIPAddress>/screencapture. The captured picture can be saved as a BMP or
JPEG file.
You can also use the URI "http(s)://<phoneIPAddress>/screencapture/download" to capture the
screen display first, and then download the image (which is saved as a JPG file and named with
the phone model and the capture time) to the local system. Before capturing the phone's
current screen, ensure that the IP address of the computer is included in the trusted IP address
for Action URI on the phone.
When you capture the screen display, the IP phone may prompt you to enter the user name and
password of the administrator if web browser does not remember the user name and password
for web user interface login.
Note
IP phones also support capturing the screen display using the old URI
"http://<phoneIPAddress>/servlet?command=screenshot".
To capture the current screen of the phone:
Enter request URI (e.g., http://10.3.20.8/screencapture) in the browser's address bar and
1.
press the Enter key on the keyboard.
Do one of the following:
2.
646