Yealink SIP-T2 SERIES Administrator's Manual page 270

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
To create a dial-now rule via web user interface:
Click on Settings->Dial Plan->Dial-now.
1.
Enter the desired value in the Rule field.
2.
Enter the desired line ID in the Account field or leave it blank.
3.
If you leave this field blank or enter 0, the dial-now rule will apply to all accounts on the IP
phone.
Click Add to add the dial-now rule.
4.
To configure the delay time for the dial-now rule via web user interface:
Click on Features->General Information.
1.
Enter the desired time within 0-14 (in seconds) in the Time-Out for Dial-Now Rule field.
2.
Click Confirm to accept the change.
3.
246