Auto-Logout Time - Yealink SIP-T2 SERIES Administrator's Manual

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Example:
security.user_password = admin:123 means setting the password of administrator (current
user name is "admin") to password 123.
Note: IP phones support ASCII characters 32-126(0x20-0x7E) in passwords. You can set the
password to be empty via web user interface only.
Web User Interface:
Security->Password
Phone User Interface:
Menu->Settings->Advanced Settings->Set Password
To change the administrator password via web user interface:
Click on Security->Password.
1.
Select admin from the pull-down list of User Type.
2.
Enter the current administrator password in the Old Password field.
3.
Enter new password in the New Password and Confirm Password fields.
4.
Valid characters are ASCII characters 32-126(0x20-0x7E) except 58(3A).
Click Confirm to accept the change.
5.
To change the administrator password via phone user interface:
Press Menu->Settings->Advanced Settings (default password: admin) ->Set Password.
1.
Enter the current administrator password in the Old PWD field.
2.
Enter new password in the New PWD field and Confirm PWD field.
3.
Valid characters are ASCII characters 32-126(0x20-0x7E).
Press the Save soft key to accept the change.
4.

Auto-Logout Time

Auto-logout time defines a specific period of time during which the IP phones will automatically
log out if you have not performed any actions via web user interface. Once logging out, you
884
Parameter Permitted Values Default