Yealink SIP-T2 SERIES Administrator's Manual page 416

Administrator's Guide for SIP-T2 Series/T19(P) E2/T4 Series/CP860 IP Phones
Details of the Configuration Parameter:
transfer.tran_others_after_conf_enable
Description:
Enables or disables the IP phone to transfer the local conference call to the other two parties
after the conference initiator drops the local conference call.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the other two parties remain connected when the conference
initiator drops the conference call.
Note: It works only if the value of parameter "account.X.conf_type" is set to 0 (Local
Conference).
Web User Interface:
Features->Transfer->Transfer on Conference Hang up
Phone User Interface:
None
To configure transfer on conference hang up via web user interface:
Click on Features->Transfer.
1.
392
Parameter
SIP-T48G/T46G/T42G/T41P/T40P/T2
9G/T27P/T23P/T23G/T21(P)
E2/T19(P) E2/CP860:
http://<phoneIPAddress>/servlet?p
=features-transfer&q=load
For SIP VP-T49G:
http://<phoneIPAddress>/servlet?m
=mod_data&p=features-transfer&q
=load
Permitted Values
0 or 1
Default
0