Procedure B2: Replacement Of Trigger - Sames Inocoat Inogun M Instruction Manual

6.4.2. Procedure B2: Replacement of trigger

• Using a pin punch D: 1.8 mm, pull the trigger pin out of
the trigger in the handle.
Remove the trigger.
Be careful not to lose the spring.
• Replacing the trigger: The pin (C) must be correctly
centered,
1 Place the spring (A) around the magnet (B).
2 Place the trigger in its housing as shown.
3 Insert the pin (C).
A
27
DRT7132
D - 2022 /09
B
C
Member of Exel group