About This Manual; Scope And Nomenclature; Recipients; Symbols - Ingeteam INGECON SUN STORAGE 1Play 3 Installation And Operation Manual

Ingeteam

1. About this manual

The purpose of this manual is to describe the INGECON SUN STORAGE 1Play units and to provide appropriate
information for their correct reception, installation, start-up, maintenance and operation.

1.1. Scope and nomenclature

This manual is applicable to the following units:
This document will refer to the various models by both their complete name and their abbreviation. It will also
refer generically to any of the models from the
inverter/charger.

1.2. Recipients

This document is intended for qualified personnel.
The status of qualified personnel referred to in this manual will be, as a minimum, that which meets all the
standards, regulations and laws regarding safety applicable to the tasks of installing and operating this unit.
Ingeteam recommends this unit to be installed by a professional installer.

1.3. Symbols

This manual uses various symbols to emphasize and highlight certain texts. The general meanings are explained
below.
General warning.
Electrical danger.
Hot surface.
Explosion hazard.
58
Complete name
Units without a transformer
INGECON SUN STORAGE 1Play 3TL
INGECON SUN STORAGE 1Play 6TL
Units with a transformer
INGECON SUN STORAGE 1Play 3
INGECON SUN STORAGE 1Play 6
INGECON SUN STORAGE 1Play
Abbreviation
1Play 3TL
1Play 6TL
1Play 3
1Play 6
family using the terms unit, inverter or
General information.
Read the section indicated in this manual.
Prohibition.
ABH2013IQM01_A - Installation and Operation Manual
About this manual