1
Stopp Solenoid
Generator IG
2
Infeed OX012
Additional outlet 5 V
MC050
3
Air seat compressor
Steering column converter
Dryer motor
4
Parking brake
Additional outlet 12 V
Dashboard lighting
5
JS1000
DP620
6
Front work lights
7
Brake light switch
Extra infeed MC050
8
Infeed MC050
Infeed IX024
9
Pressure sensor filter
F/N/R button for driving direc-
tion selector switch
10 Seat contact switch
JS 120, micro switch
11 Sensor for number of revolu-
tions and return filter
Drive pedal
Inch pedal
12 Front work hydraulics
Rear work hydraulics
Float position
Cruise control
Extra 5 V
13 Not assigned
14 Not assigned
Fuses in the roof, to the right of the driver
1
Left positioning light
License plate lighting
2
Right positioning light
3
Overall lamp
Rear worklight
4
Lights
Current supply
Switch illumination
5
Lights
Warning system
6
Seat heater
Radio
7
Wiper
Windscreen washer system
8
Warning system
Radio
Relay
5 A
10 A
20 A
Relay in the electrical box of the driver's cabin
R1
Direction-indicator lamp
10 A
R2
Lights
R3
Lights
R4
Power supply to the roof lighting
5 A
R5
Power supply fuses 50 A
20 A
Tilt driver cabin
10 A
The driver's cabin of the machine can be
tilted for service and repair tasks.
Park the machine on an even surface.
10 A
Remove ignition key.
Slightly release the front fasteners of
3 A
the cabin, leave the screws in.
Loosen the rear fasteners of the cabin.
3 A
5 A
5 A
Front and rear fastener
Lift the cabin and tilt it upwards. To
avoid damage, at least two adults are
needed for this task.
Secure the cabin using the support
mounted underneath the cabin. Fasten
the support using the matching screw.
5 A
5 A
15 A
10 A
Secure the support with a screw and a nut
WARNING
15 A
Prior to working underneath the cabin, en-
sure that it is properly secured so that it
7.5 A
does not tilt down inadvertently.
Never tilt the cabin up by yourself or work
10 A
on a raised cabin!
5 A
EN
13
-
31