Table of Contents
Advertisement
Chapter 3 Unpack and Installation
Unpack:
When unpacking the components of XCM-250 monitor, please verify that none
of the components listed in Table 3.1 are damaged or lack. If there is any
missing, contact your distributors, Beijing OSEE Technology Co., Ltd., or
OSEE Americas, Ltd. for it.
No.
1
2
3
4
5
6
7
Installation:
Prepare for installation
1.
Please follow the procedures below before installing XCM-250:
Check the equipment for any invisible damage that may have occurred
during transit.
Confirm all the items listed on the packing list have been received.
Remove all the packing material including electrostatic-resistant
packing.
Retain these packing materials for future use.
Mount a XCM-250 in your desired location of a standard rack.
2.
Adequate ventilation is required when installed to prevent possible
damage to the XCM-250.
Connect required cables for signal input and output. For BNC
3.
connections use 75Ω rated connectors.
Connect 24V6.67ADC power source using the included power cord.
4.
Connect the power cord to the power interface.
5.
Table 3-1 Packing List
Item
Device
Pedestal with screws
Power cord
adapter
User manual
warranty card
Certificate card
11
Unpack and Installation
Quantity
1
1
1
1
1
1
1
Advertisement
Table of Contents
