Table of Contents
Advertisement
Functionality of the Main Menu
The two pictures generated by two input signals separately are
displayed one in another. One is displayed on full screen, called as the
main picture, and the other is displayed in an inset window, called as the
slave picture. In PIP mode, the relevant position relationship of the main
picture and the slave picture is as shown in Figure 5.1-22 :
Figure 5.1-22 The Position Relationship in PIP Mode
And you can adjust the display size by the PIP SIZE item, and there are
two kinds of outlines for the slave picture, as shown in Figure 5.1-23:
Main
Main
Picture
Picture
Slave
Slave
Picture
Picture
PIP SIZE=LARGE
PIP SIZE=SMALL
Figure 5.1-23 The Size for the Slave Picture
In PIP mode, it displays the WFM or Audio Meter only for the signal of
the main picture.
PBP(Picture by Picture)
The two pictures generated by two input signals separately are
displayed side by side, and this function helps with white balance
adjustment, and determining shooting angles between two cameras etc.
In PBP mode, the size of the main picture is as large as the slave
picture's, and the position relationship of the main picture and the slave
50
Advertisement
Table of Contents
