Table of Contents
Advertisement
Functionality of the Main Menu
the front panel, meanwhile, the POWER indicator starts flashing
rapidly for one minute (it flashes in turn with red, green, yellow, white
color) before the screen saver is activated. After that, the flashing goes
slowly in red when the screen saver is activated.
OFF: Disables the screen saver function.
Auto Standby
4.
The Auto Standby function is used to set the status of the monitor when
the Power button is turned on or off.
ON: AUTO STANDBY is set to ON to enable the auto standby mode.
Thus, the auto standby will be activated when detecting no signal input
or signal disappeared for 10 seconds or more, and there will be a
prompt during the process, as shown in Figure 5.1-31:
Figure 5.1-31 Entering the Auto Standby Mode
Press POWER button when the monitor is in operation mode, it will go
into auto standby mode, and the POWER indicator is lit in yellow. Then,
press POWER button again when the monitor is in auto standby mode,
it will start up and the POWER indicator is lit in green.
OFF: AUTO STANDBY is set to OFF to disable the auto standby mode.
It will prompt a power off confirmation window when turn off the
monitor by press the POWER button.
Press POWER button when the monitor is in operation mode, it will
prompt a power off confirmation window, as shown in Figure 5.1-32,
press ∧(UP) or ∨(DOWN) button to select Yes or No.
Select Yes and press ENTER button to confirm, it will power off the
monitor, then the POWER indicator is lit in red, otherwise, Select No
and press ENTER button to confirm, it will cancel the power off
operation, and the POWER indicator is still lit in green.
When the AUTO STANDBY is set to ON, the device will be standby when
Going into Standby Mode
POWER OFF CONFIRM
Are you sure to power off?
No
Figure 5.1-32 Prompt for Power Off
Yes
56
Advertisement
Table of Contents
