Table of Contents
Advertisement
Functionality of the Main Menu
The relationship of Items, Default Value, Domain Range and Description
of the sub-item is shown in Table 5.1-15:
Table 5.1-15 The Description of GPI Menu Items
Items Default Value Domain Range
TALLY
GPI1
GREEN
GPI2 TALLY RED
GPI3 UNDEF
GPI4 UNDEF
GPI5 UNDEF
GPI6 UNDEF
Assign functions to GPI1~GPI6, some is level triggered, and some is edge
triggered, refer to Table 5.1-16 for the details.
GPI control: when it changes it would be as a control value of response
control. If the level does not change, but there are other control caused by
changes in the control value, perform this change. When boot, detect the
GPI input status after initialization. If a GPI value is low, the monitor will
control the corresponding operation. The TALLY is directly control by the
level.
Table 5.1-16 The Description for GPI Items and Their Trigger
Items
Function
Enable/Disable the display of
AREA MARKER
area marker.
CENTER
Enable/Disable the display of Low: Enabled; High: Disabled
UNDEF,
AREA
CENTER MARKER, SAFETY
MARKER, ASPECT, NATIVE,
OVER SCAN, UNDER SCAN,
BLUE ONLY, MONO,
DELAY,
V
DELAY,
DELAY, SDI1, SDI2, LINE1,
LINE2,
HDMI,
GREEN, TALLY RED
the same as GPI1
the same as GPI1
the same as GPI1
the same as GPI1
the same as GPI1
64
Description
MARKER,
Set a function to GPI1
H/V
TALLY
Set a function to GPI2
Set a function to GPI3
Set a function to GPI4
Set a function to GPI5
Set a function to GPI6
Trigger
Low: Enabled; High: Disabled
Advertisement
Table of Contents
