Table of Contents
Advertisement
The INTERLACE MODE function is not available in PIP, PBP, WIPE, FLIP,
or BLENDING mode.
The INTERLACE MODE function is available for SDI inputs.
FLIP Mode
The input signal has been inverted horizontally by a mirror type in FLIP
Display mode.
Select the menu item CONFIG SDI ASSIST MODEN to be set to H FLIP,
thus to inverse these inputs horizontally.
The display result in the Horizontal FLIP MODE is as shown in Figure
5.1-30:
The H FLIP MODE function is not available in WIPE, INTERLACE, or
BLENDING mode.
The Wave Form of the input signal in H FLIP mode will not be inversed
horizontally.
Screen Saver
3.
The Screen Saver function is used to detect a still image on the screen, in
order to protect the screen of the monitor
ON: When a still image is displayed on the screen for 10 minutes or
more, the brightness of the screen is automatically reduced to its
lowest to prevent burn-in of the screen(Contrast=0). The brightness
returns to normal if you input a moving image or operate any key on
OFF
Figure 5.1-30 Horizontal Flip Mode
55
Functionality of the Main Menu
FLIP HORIZONTALLY
Advertisement
Table of Contents
