Marker Menu - OSEE XCM-250-OLED User Manual

Functionality of the Main Menu
according to the line connection mode. When select a signal source format
for LINE2, you can set the menu item INPUT SELECTLINE2 as CVBS,
LINE2(Y/C) or LINE2(YPBPR), in addition, press INPUT button to pop up
the source list for LINE2 selection.

5.1.3 MARKER Menu

The MARKER menu items are used to adjust the marker parameters, the
menu items are as shown in Figure 5.1-10:
MAIN
STATUS
INPUT SELECT
MARKER
AUDIO
DISPALY
CLOSED CAPTION
CONFIG
COLOR TEMP
FUNCTION KEY
GPI
IMD
KEY INHIBIT
The relationship of Items, Default Value, Domain Range and Description
of the sub-item is shown in Table 5.1-3:
Table 5.1-3 The Description of MARKER Menu Items
Default
Items
Value
MARKER OFF
MARKER
AREA MARKER
CENTER MARKER
SAFETY MARKER
MARKER LEVEL
MARKER MAT
CROSS HATCH
Figure 5.1-10 MARKER Menu
Domain Range
OFF/ON
36
MARKER
Description
Set whether to show all of
the markers.
It is the main switch for
area marker,
marker and
marker.
OFF
OFF
OFF
OFF
1
OFF
OFF
center
safety